View M215HW01-V0_2040402.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

au optronics corporation product specification m215hw01 v0 document version1.1 1 ( ) preliminary specification ( v ) final specification module 21.5? color tft-lcd model name m215hw01 v0 customer date approved by note: this specification is subject to change without notice. approved by date sean chen 2008/05/09 prepared by boris chu 2008/05/09 desktop display business group / au optronics corporation www..net
au optronics corporation product specification m215hw01 v0 document version1.1 2 contents 1.0 handling precautions ........................... ................................................... .............................. 5 2.0 general description............................ ................................................... ................................ 6 2.1 display characteristics........................ ................................................... ............................ 6 2.2 optical characteristics ........................ ................................................... ............................ 7 3.0 functional block diagram....................... ................................................... ......................... 11 4.0 absolute maximum ratings ....................... ................................................... ...................... 12 4.1 tft lcd module................................. ................................................... .......................... 12 4.2 backlight unit ................................. ................................................... ............................... 12 4.3 absolute ratings of environment ................ ................................................... .................. 12 5.0 electrical characteristics..................... ................................................... ............................. 13 5.1 tft lcd module................................. ................................................... .......................... 13 5.1.1 power specification.......................... ................................................... .......................... 13 5.1.2 signal electrical characteristics............ ................................................... ..................... 14 6.0 signal characteristic .......................... ................................................... .............................. 17 6.1 pixel format image............................. ................................................... .......................... 17 6.2 the input data format.......................... ................................................... .......................... 17 6.3 signal description ............................. ................................................... ............................ 18 6.4 timing characteristics......................... ................................................... .......................... 19 6.5 timing diagram ................................. ................................................... ............................ 20 6.6 power on/off sequence .......................... ................................................... .................. 21 7.0 connector & pin assignment ..................... ................................................... ..................... 22 7.1 tft lcd module................................. ................................................... .......................... 22 7.1.1 pin assignment ................................................... .................................................. 22 7.2 backlight unit ................................. ................................................... ............................... 23 7.2.1 signal for lamp connector ................................................... ................................... 23 8.0 reliability test............................... ................................................... .................................... 24 9.0 shipping label ................................. ................................................... ................................. 25 10.0 mechanical characteristics.................... ................................................... ........................ 26
au optronics corporation product specification m215hw01 v0 document version1.1 3 record of revision version and date page old description new description remark 0.1 2008/01/18 all first edition for customer - 0.2 2008/05/09 6 contrast ratio => 1000 (typ.) (t bd) contrast ratio => 1000 (typ.) revised 0.2 2008/05/09 6 nominal input voltage vdd => +5.0 v (tbd) nominal input voltage vdd => +5.0 v revised 0.2 2008/05/09 6 power consumption => tbd w (typ.) (vdd line + ccfl line) power consumption => 28.72 w (typ.) (vdd line + ccfl line) revised 0.2 2008/05/09 6 weight => tbd (typ.) weight => 2188 (typ.) revised 0.2 2008/05/09 7 contrast ratio min typ max note 600 1000 3 (tbd) contrast ratio min typ max note 600 1000 3 revised 0.2 2008/05/09 7 response time raising time (t rr ) min typ max - 3.4 7.4 falling time (t rf ) min typ max - 1.6 2.6 raising + falling min typ max - 5 10 response time raising time (t rr ) min typ max - 3.8 5.5 falling time (t rf ) min typ max - 1.2 2.5 raising + falling min typ max - 5 8 revised 0.2 2008/05/09 7 color / chromaticity coordinates (cie) green x min typ max note 0.262 0.292 0.322 5 (tbd) color / chromaticity coordinates (cie) green x min typ max note 0.252 0.282 0.312 5 revised 0.2 2008/05/09 11 mating type: fi-x30hl (locked type) fi-x30h (unlocked type) mating type: fi-x30hl (locked type) revised 0.2 2008/05/09 12 4.2 backlight unit item symbol min max ccfl icfl 3.0 7.5 4.2 backlight unit item symbol min max ccfl icfl 3.0 8.0 revised 0.2 2008/05/09 13 idd input current min typ max - tbd tbd idd input current min typ max - 0.9 1.17 revised 0.2 2008/05/09 13 pdd vdd power min typ max - tbd tbd pdd vdd power min typ max - 4.5 5.4 revised 0.2 2008/05/09 13 irush inrush current min typ max - - tbd irush inrush current min typ max - - 2 revised 0.2 2008/05/09 15 5.2 backlight unit ccfl frequency (fcfl) min typ max tbd - - 5.2 backlight unit ccfl frequency (fcfl) min typ max 40 55 60 revised
au optronics corporation product specification m215hw01 v0 document version1.1 4 0.2 2008/05/09 15 note 1: *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. note 1: *2 it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *6 for designing ccfl current, it is highly recommanded to use symmetric and consistent sinusoidal wave for each ccfl input current with asymmetric ration of 10% or less in both postive area and negative area (ie. 0.9* 2*i rms < i 1 & i 2 < 1.1* 2*i rms ) as refer to the following diagram, otherwise proper ccfl functionality cannot be guarantied. revised 0.2 2008/05/09 19 6.4 timing characteristics item min typ max data clk 55 72 90 h-section period 1010 1050 2047 blanking 50 90 681 v-section period 1108 1130 2047 blanking 28 50 255 6.4 timing characteristics item min typ max data clk 40 75 90 h-section period 1034 1060 2047 blanking 74 100 1087 v-section period 1088 1120 2047 blanking 8 40 967 revised 0.2 2008/05/09 22 7.1 tft lcd module mating housing part number fi-x30hl (locked type) fi-x30h (unlocked type) 7.1 tft lcd module mating housing part number fi-x30hl (locked type) revised 0.2 2008/05/09 23 7.2.1 signal for lamp connector lower connector no. cn3 pin no. 1 => pink pin no. 2 => white lower connector no. cn4 pin no. 1 => pink pin no. 2 => white 7.2.1 signal for lamp connector lower connector no. cn3 pin no. 1 => blue pin no. 2 => black lower connector no. cn4 pin no. 1 => blue pin no. 2 => black revised 0.2 2008/05/09 25 9.0 shipping label note 3: the green mark will be presented only when the green documents have been ready by auo internal green team. 9.0 shipping label note 3: for china rohs compatible products, auo will add for identification. note 4: the green mark will be presented only when the green documents have been ready by auo internal green team. revised 0.2 2008/05/09 26 10.0 mechanical characteristics version 0.1 10.0 mechanical characteristics version 0.2 revised 1.0 2008/06/12 preliminary specification version 0.2 final specification version 1.0 1.1 2008/08/01 6 this specification applies to the 21.5 inch-wide color a-si tft-lcd module m215hw01.the display supports the wuxga - 1920(h) x 1080(v) screen format and 16.7m colors (rgb 6-bits + hi-frc data). this specification applies to the 21.5 inch-wide color a-si tft-lcd module m215hw01.the display supports the full hd - 1920(h) x 1080(v) screen format and 16.7m colors (rgb 6-bits + hi-frc data). revised
au optronics corporation product specification m215hw01 v0 document version1.1 5 1.0 handling precautions 1) since front polarizer is easily damaged, pay att ention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact wi th water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break o r crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open or modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. oth erwise the tft module may be damaged. 10) at the insertion or removal of the signal inter face connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure, do not twist nor bend the tft module even momentary. at designing the enclosure, it shou ld be taken into consideration that no bending/twisting forces are applied to the tft modu le from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammabilit y grade is used in the lcd module. the lcd module should be supplied by power complied with re quirements of limited power source (iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the ccfl in ha zardous voltage circuit.
au optronics corporation product specification document version 1.1 6 numpages | 29 } m215hw01 v0 2.0 general description this specification applies to the 21.5 inch-wide co lor a-si tft-lcd module m215hw01.the display supports the full hd - 1920(h) x 1080(v) sc reen format and 16.7m colors (rgb 6-bits + hi-frc data). all input signals are 2-channel lvds interface and this module doesn?t contain an inverter board for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 546.86(21.53?) active area [mm] 476.64 (h) x 268.11 (v) pixels h x v 1920(x3) x 1080 pixel pitch [um] 248.25 (per one triad) 248.25 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white white luminance ( center ) [cd/m 2 ] 300 cd/m 2 (typ.) contrast ratio 1000 (typ.) optical response time [msec] 5ms (typ., on/off) nominal input voltage vdd [volt] +5.0 v power consumption (vdd line + ccfl line) [watt] 28.72 w (typ.) (without inverter, all black pattern) weight [grams] 2188 (typ.) physical size [mm] 495.6(w) 292.2(h) 16.35(d) typ electrical interface dual channel lvds support color 16.7m colors (rgb 6-bit + hi_frc ) surface treatment anti-glare, 3h temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance
au optronics corporation product specification document version 1.1 7 numpages | 29 } m215hw01 v0 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 : item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 150 170 - - viewing angle [degree] vertical (up) cr = 10 (down) 140 160 - - 2 contrast ratio normal direction 600 1000 - 3 raising time (t rr ) - 3.8 5.5 falling time (t rf ) - 1.2 2.5 response time [msec] raising + falling - 5 8 4 red x 0.618 0.648 0.678 red y 0.309 0.339 0.369 green x 0.252 0.282 0.312 green y 0.573 0.603 0.633 blue x 0.113 0.143 0.173 color / chromaticity coordinates (cie) blue y 0.040 0.070 0.100 white x 0.283 0.313 0.343 color coordinates (cie) white white y 0.299 0.329 0.359 5 central luminance [cd/m 2 ] 240 300 - 6 luminance uniformity [%] 75 80 - 7 crosstalk (in 60hz) [%] 1.5 8 flicker db -20 9
au optronics corporation product specification document version 1.1 8 numpages | 29 } m215hw01 v0 note 1: measurement method the lcd module should be stabilized at given temper ature for 30 minutes to avoid abrupt temperature change during measuring (at surface 35 ) . in order to stabilize the luminance, the measurement should be executed after lighting backl ight for 30 minutes in a stable, windless and dark room. note 2: definition of viewing angle measured by eldim (ezcontrast 88) viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal view ing angles). the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perp endicular to the display surface with the screen rotated about its center to develop the desi red measurement viewing angle. center of the screen tft - lcd module measured distance photo detector lcd panel
au optronics corporation product specification document version 1.1 9 numpages | 29 } m215hw01 v0 note 3: contrast ratio is measured by topcon sr-3 note 4: definition of response time measured by westar trd-100a the output signals of photo detector are measured w hen the input signals are changed from ?full black? to ?full white? (rising time, tr r ), and from ?full white? to ?full black? (falling t ime, tf f ), respectively. the response time is interval between the 10% and 90% (1 frame at 60 hz) of amplitudes. tr r + tf f = 5 msec (typ.). algorithm: gray level a ? gray level b R 16, then the average gray to gray response time is 2 ms, (f= 60 hz). note 5: color chromaticity and coordinates (cie) is measured by topcon sr-3 note 6 : central luminance is measured by topcon sr-3 note 7: luminance uniformity of these 9 points is defined as below and measured by topcon sr-3 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = 100 90 10 0 % optical response w hite tr f tr r 100 10 0 % optical response w hite black tr f tr r black 1 frame 1 frame
au optronics corporation product specification document version 1.1 10 numpages | 29 } m215hw01 v0 note 8: crosstalk is defined as below and measured by topcon sr-3 ct = | yb ? ya | / ya 100 (%) where ya = luminance of measured location without gray le vel 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) note 9: test patern: subchecker pattern measured by topcon sr-3 r g b r g b r g b r g b r g b r g b method: record dbv & dc value with trd-100 level dc hz) 30 level(at ac log 20 (db) flicker = gray level = l127 gray level = l0 amplitude time dc ac
au optronics corporation product specification document version 1.1 11 numpages | 29 } m215hw01 v0 3.0 functional block diagram the following diagram shows the functional block of the 21.5 inch color tft-lcd module: i/f + x-pcb i/f pcb interface: fi-xb30ssrl-hf16 (jae) or al230f-a0g1d-p(p-two) mating type: fi-x30hl (locked type) tft-lcd 1920(x3) x 1080 pixels g1 g1080 d1 d5760 4 ccfl inverter dc conne ctor dc/dc converter lvds receiver timing controller rsds transmitter gamma correction auo asic lvd +5v x - driver ic y - driver ic lvds auo asic
au optronics corporation product specification document version 1.1 12 numpages | 29 } m215hw01 v0 4.0 absolute maximum ratings absolute maximum ratings of the module are as follo wing: 4.1 tft lcd module 4.2 backlight unit item symbol min max unit conditions ccfl current icfl 3.0 8.0 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min. max. unit conditions operating temperature top 0 +50 [ o c] operation humidity hop 5 90 [%rh] storage temperature tst -20 +60 [ o c] storage humidity hst 5 90 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceedi ng maximum values note 3: for quality perfermance, please refer to auo iis(in coming inspection standard). operating range storage range item symbol min max unit conditions logic/lcd drive voltage vdd 0 5.5 [volt] note 1,2
au optronics corporation product specification document version 1.1 13 numpages | 29 } m215hw01 v0 5.0 electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as following: note 1: measurement conditions: the duration of rising time of power input is 470us . +5.0v +12.0v vcc r1 47k r2 1k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) symbol parameter min typ max unit conditions vdd logic/lcd drive voltage 4.5 5.0 5.5 [volt] +/-10% idd input current - 0.9 1.17 [a] vdd= 5.0v, all black pattern at 75hz, +30% pdd vdd power - 4.5 5.4 [watt] vdd= 5.0v, all black pattern at 75hz irush inrush current - - 2 [a] note 1 vddrp allowable logic/lcd drive ripple voltage - - 300 [mv] p-p vdd= 5.0v, all black pattern at 75hz
au optronics corporation product specification document version 1.1 14 numpages | 29 } m215hw01 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. please refer to specifications of sn75lvds82dgg (texas instruments) in detail. characteristics of each signal are as following: symbol parameter min typ max units condition vth differential input high threshold - +50 +100 [mv] vicm = 1.2v note 1 vtl differential input low threshold -100 -50 - [mv] vicm = 1.2v note 1 vid input differential voltage 100 - 600 [mv] note 1 vicm differential input common mode voltage +1.0 +1.2 +1.5 [v] vth-vtl = 200mv (max) note 1 note 1: lvds signal waveform
au optronics corporation product specification document version 1.1 15 numpages | 29 } m215hw01 v0 5.2 backlight unit parameter guideline for ccfl inverter is under stab le conditions at 25 (room temperature): parameter min. typ. max. unit note ccfl standard current (iscfl) 7.0 7.5 8.0 [ma] rms ccfl operation current (ircfl) 3.0 7.5 8.0 [ma] rms 2 ccfl frequency (fcfl) 40 55 60 [khz] 3, 4 ccfl ignition voltage (vicfl, ta= 0 ) 1780 - - [volt] rms ccfl ignition voltage (vicf, ta= 25 ) 1380 - - [volt] rms 5 ccfl operation voltage (vcfl) - 791 (@ 7.5ma) 880 [volt] rms ccfl power consumption (pcfl) - 23.7 26.4 [watt] 6 ccfl life time (ltcfl) 40,000 50,000 - [hour] 7 note 1: typ. values are auo recommended design values. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 it is recommended to check the inverter carefull y. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 while designing an inverter, it is suggested to check safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] whe n ccfl is damaged. *4 generally, ccfl has certain delay time after app lying kick-off voltage. it is recommended to keep on applying kick-off voltage for 1 [sec] until discharge. *5 reducing ccfl current will increase ccfl dischar ge voltage and generally increases ccfl discharge frequency. so all the parameters of the i nverter should be carefully designed so the inverter will not produce too much leakage current from high-voltage output. *6 for designing ccfl current, it is highly recomma nded to use symmetric and consistent sinusoidal wave for each ccfl input current with as ymmetric ration of 10% or less in both postive area and negative area (ie. 0.9* 2*i rms < i 1 & i 2 < 1.1* 2*i rms ) as refer to the following diagram, otherwise proper ccfl functionality cannot be guarantied.
au optronics corporation product specification document version 1.1 16 numpages | 29 } m215hw01 v0 note 2: ccfl standard current is measured at 25 2 . note 3: ccfl discharge frequency should be carefully deter mined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect lamp life and r eliability characteristics. note 5: ccfl inverter should be able to release power that has generating capacity exceeding 1780 volt. lamp units need minimum voltage, 1780 vo lt, for ignition. note 6: the variance of ccfl power consumption is 10%. (i rcfl vcfl 4 = pcfl) note 7: definition of life time: brightness becomes 50%. th e minimum life time of ccfl unit is on the condition of 7.5ma ccfl current and 25 2 .
au optronics corporation product specification document version 1.1 17 numpages | 29 } m215hw01 v0 6.0 signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1 919 1 920 1st line 1080 line 6.2 the input data format note 1: r/g/b data 7:msb, r/g/b data 0:lsb o = ?first pixel data? e = ?second pixel data?
au optronics corporation product specification document version 1.1 18 numpages | 29 } m215hw01 v0 6.3 signal description the module using one lvds receiver sn75lvds82(texas instruments). lvds is a differential signal technology for lcd interface an d high speed data transfer device. lvds transmitters shall be sn75lvds83(negative edge samp ling). the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxe xxx) transmits even pixels. pin # signal name description 1 rxo in 0 - negative lvds differential data input (odd data) 2 rxo in 0+ positive lvds differential data input (odd data) 3 rxo in 1 - negative lvds differential data input (odd data) 4 rxo in 1+ positive lvds differential data input (odd data) 5 rxo in 2 - negative lvds differential data input (odd data ,dsptmg ) 6 rxo in 2+ positi ve lvds differential data input (odd data ,dsptmg ) 7 gnd power ground 8 rxoc lk - negative lvds differential clock input (odd clock) 9 rxoc lk + positive lvds differential clock input (odd clock) 10 rxo in 3 - negative lvds differential data input (odd data) 11 rxo in 3+ positive lvds differential data input (odd data) 12 rxe in 0 - negative lvds differential data input (even data ) 13 rxe in 0+ positive lvds differential data input (even data) 14 gnd power ground 15 rxe in 1 - positive lvds differential data input ( even data) 16 rxe in 1+ negative lvds differential data input (even data) 17 gnd power ground 18 rxe in 2 - negative lvds differential data input (even data) 19 rxe in 2+ positive lvds differential data input (even data) 20 rxec lk - negative lvds differential clock input (even clock) 21 rxec lk + positive lvds differential clock input (even clock) 22 rxe in 3 - negative lvds differential data input (even data) 23 rxe in 3+ positive lvds differential data input (even data) 24 gnd power ground 25 nc no connectio n (for auo test only . do not connect ) 26 nc no connection (for auo test only . do not connect ) 27 nc no connection (for auo test only. do not connect) 28 vdd power +5v 29 vdd power +5v 30 vdd power +5v
au optronics corporation product specification document version 1.1 19 numpages | 29 } m215hw01 v0 note1: start from left side note2: input signals of odd and even clock shall be the sa me timing. 6.4 timing characteristics basically, interface timing described here is not a ctual input timing of lcd module but close to output timing of sn75lvds82dgg (texas instruments) or equivalent. item symbol min typ max unit data clk tclk 40 75 90 [mhz] period th 1034 1060 2047 [tclk] display area tdisp(h) 960 960 960 [tclk] h-section blanking tblk(h) 74 100 1087 [tclk] period tv 1088 1120 2047 [th] display area tdisp(h) 1080 1080 1080 [th] v-section blanking tblk(h) 8 40 967 [th] frame rate f 50 60 75 [hz] note : de mode only
au optronics corporation product specification document version 1.1 20 numpages | 29 } m215hw01 v0 6.5 timing diagram line line pixel 7 invalid data pixel pixel m-3 2 tdisp(h) pixel 1 pixel pixel invalid data 6 m-2 m-1 rgb data x pixel de pixel pixel clk n 3 line line 3 2 tdisp(v) pixel rgb data (odd) rgb data (even) line 8 m pixel m pixel m-4 invalid data th tv pixel n tclk pixel m-5 invalid data 4 pixel 5 invalid data 12 pixel invalid data 1 de 4 pixel 11 9 line n line tblk(h) 10 pixel pixel y tblk(v) m-1 pixel pixel m pixel m-3 m-2 pixel pixel pixel 1 4 pixel 3 pixel 2 m-4 pixel pixel m-5 m-6 pixel m-7 pixel th
au optronics corporation product specification document version 1.1 21 numpages | 29 } m215hw01 v0 6.6 power on/off sequence vdd power and lamp on/off sequence are as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. value parameter min. typ. max. unit t1 0.5 - 10 [msec] t2 0 - 50 [msec] t3 200 - - [msec] t4 200 - - [msec] t5 0 16 50 [msec] t6 - - 100 [msec] t7 1000 - - [msec]
au optronics corporation product specification document version 1.1 22 numpages | 29 } m215hw01 v0 7.0 connector & pin assignment physical interface is described as for the connecto r on module. these connectors are capable of accommodating the following signals and will be fol lowing components. 7.1 tft lcd module connector name / designation interface connector / interface card manufacturer jae / p-two type part number fi-xb30ssrl-hf16 / al230f-a0g1d-p mating housing part number fi-x30hl (locked type) 7.1.1 pin assignment pin# signal name pin# signal name 1 rxoin0- 2 rxoin0+ 3 rxoin1- 4 rxoin1+ 5 rxoin2- 6 rxoin2+ 7 gnd 8 rxoclkin- 9 rxoclkin+ 10 rxoin3- 11 rxoin3+ 12 rxein0- 13 rxein0+ 14 gnd 15 rxein1- 16 rxein1+ 17 gnd 18 rxein2- 19 rxein2+ 20 rxeclkin- 21 rxeclkin+ 22 rxein3- 23 rxein3+ 24 gnd 25 nc (for auo test only. do not connect) 26 nc (for auo test only. do not connect) 27 nc (for auo test only. do not connect) 28 vdd 29 vdd 30 vdd
au optronics corporation product specification document version 1.1 23 numpages | 29 } m215hw01 v0 7.2 backlight unit physical interface is described as for the connecto r on module. these connectors are capable of accommodating the following signals and will be fol lowing components. connector name / designation lamp connector / backlight lamp manufacturer cvilux type part number cp0502sl090 mating type part number cp0502p1ml0 7.2.1 signal for lamp connector connector no. pin no. input color function 1 hot1 pink high voltage cn1 2 cold1 white low voltage 1 hot2 blue high voltage upper cn2 2 cold2 black low voltage connector no. pin no. input color function 1 hot1 pink high voltage cn3 2 cold1 white low voltage 1 hot2 blue high voltage lower cn4 2 cold2 black low voltage
au optronics corporation product specification document version 1.1 24 numpages | 29 } m215hw01 v0 8.0 reliability test environment test conditions are listed as following table. items required condition note temperature humidity bias (thb) ta= 50 , 80%rh, 300hours high temperature operation (hto) ta= 50 , 50%rh, 300hours low temperature operation (lto) ta= 0 , 300hours high temperature storage (hts) ta= 60 , 300hours low temperature storage (lts) ta= -20 , 300hours vibration test (non-operation) acceleration: 1.5 grms wave: random frequency: 10 - 200 hz sweep: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 60 cm, package test thermal shock test (tst) -20 / 30min, 60 / 30min, 100 cycles 1 on/off test on/10sec, off/10sec, 30,000 cycles contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point. esd (electro static discharge) air discharge: 15kv, 150pf(330 ) 1sec 8 points, 25 times/ point. 2 altitude test operation:10,000 ft non-operation:30,000 ft note 1 : the tft-lcd module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature ch ange consists of varying the temperature from -2 0 to 6 0 , and back again. power is not applied during the t est. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. note 2 : en61000-4-2, esd class b: certain performance deg radation allowed no data lost self-recoverable no hardware failures.
au optronics corporation product specification document version 1.1 25 numpages | 29 } m215hw01 v0 9.0 shipping label the label is on the panel as shown below: note 1: for pb free products, auo will add for identification. note 2: for rohs compatible products, auo will add for identification. note 3: for china rohs compatible products, auo will add for identification. note 4: the green mark will be presented only when the gre en documents have been ready by auo internal green team. m215hw01 v0
ver 1.1 10.0 mechanical characteristics
ver 1.1

▲Up To Search▲

Price & Availability of M215HW01-V0

	To Download M215HW01-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .